Pricing Table Particle

Quickly drive clicks-and-mortar catalysts for change
  • Basic
  • Standard Compliant Channels
  • $50
  • Completely synergize resource taxing relationships via premier market
  • 1 GB of space
  • Support at $25/hour
  • Sign Up
  • Premium
  • Standard Compliant Channels
  • $100
  • Completely synergize resource taxing relationships via premier market
  • 10 GB of space
  • Support at $15/hour
  • Sign Up
  • Platinum
  • Standard Compliant Channels
  • $250
  • Completely synergize resource taxing relationships via premier market
  • 30 GB of space
  • Support at $5/hour
  • Sign Up

The Chirpsounder / Ionosonde

ionosphereAnybody who has ever set up a working international HF link will know it can be a tricky business. You see there's a pesky movable thing called the ionosphere which is pretty fundamental to the whole business.
Communicating with a point halfway round the planet using HF is like trying to play that old 70's children's game called Rebound. Since radio links are usually close to or distinctly line of sight links, communicating with a point on the other side of a sphere would seem like a fairly insurmountable problem. I'd think the first time this problem was solved using the ionosphere it was probably an accident caused by some early radio pioneers receiving signals for their fellow pioneers some way round the planet and beginning to wonder why and how it was happening.

The reason it was and does happen is because of a thin layer of the Earths atmosphere called the ionosphere. The ionosphere is a region of the upper atmosphere, from about 85 km (53 mi) to 600 km (370 mi) altitude, and includes the thermosphere and parts of the mesosphere and exosphere. It is distinguished because it is ionized by solar radiation. It plays an important part in atmospheric electricity and forms the inner edge of the magnetosphere. It has practical importance because, among other functions, it influences radio propagation to distant places on the Earth. This is the reason we as Telecommunications Engineers are interested in it.

The ionosphere is a layer of electrons and electrically charged atoms and molecules in the upper Earths atmosphere, ranging from a height of about 50 km (31 mi) to more than 1,000 km (620 mi). It exists because of the Suns ultraviolet radiation which causes these gases to ionise and develop a charge. Because of the boundary between this layer and the relatively uncharged layer below, wave diffraction occurs. This phenomenon takes place at different incidences with different frequencies and, with clever utilisation of this property, the ionosphere can be utilized to "bounce" a transmitted signal down to the ground. Transcontinental HF-connections can rely on up to 5 of these bounces, or hops.

aerials-takeoff-anglesIt is the process of determining the appropriate frequencies and their respective bounce points around the planet that is the focus of this post. The applied physics involved in this refraction are beyond the scope of this post but, in a nutshell, what they do produce is a spread of frequencies which bounce at different incident angles to the boundary layer such that different distant points on the surface of the planet can be reached when the bounced radio wave returns to the ground. This is shown more clearly in the diagram on the left.

Unfortunately it is not quite as straightforward as the diagram above suggests as the strength and location of the ionosphere is always changing as day becomes night and also as cosmic radiation from the Sun changes over time. This presents those wishing to use this phenomenon with the constant problem of determining which frequencies are workable and usable between any two given points on the Earth.

The problem of determining these usable frequencies was the driving force behind the invention of the Chirpsounder (also known as an Ionosonde). The Chirpsounder, or rather a pair of Chirpsounders operate in tandem using a Chirp transmitter in one location and a Chirp receiver in another. The job of the transmitter is to transmit a sweep of radio output from one predetermined frequency to another over a given amount of time. A Chirp receiver situated close to the transmitter would, if synchronised to match the sweep timings, receive all of the sweep from the beginning to the end but the same Chirp receiver placed two thousand miles away over the Earths horizon may not fare so well. This is where the technology really comes into its own.

Screenshot_3When a Tx/Rx pair of Chirpsounders are running a synchronised sweep between two distant locations, the receiver will receive from the transmitter only during those parts of the sweep that are conducive to a working link between the two. This information is gathered by the Chirp receiver and is used to provide the user with a graph showing frequency on the x-axis and receive delay on the y-axis. There will also often be a display of receive signal strength incorporated in the output. A sample Chirpsounder output is shown on the right.

As can be seen there are a number of elements shown on the trace and each of these represents a successful reception of the signal from the transmitter. The more solid the line, the more reliable the link and this information, when used in parallel with the received power information can enable telecommunications professionals to choose the most appropriate frequency. Once the decision had been made the operational transmitters and receiver could be set appropriately and the operational radio channel could begin to pass its traffic using the ionospheric bounce. Quite amazing really.

Continue reading
165 Hits
0 Comments

Femtocells & Relays in Advanced Wireless Networks

With the huge growth of mobile phones complementing a revolution wireless network technologies there has been a huge change in the consumer’s lifestyle and dependence on mobile phones. With the emergence of smart phones (mobile web) consumers are replacing not only their fixed lines but have started downsizing the number of PC's in the home. Fundamentally, consumers want great voice quality, reliable service, and low prices. But today’s mobile phone networks often provide poor indoor coverage and expensive per-minute pricing. In fact, with the continued progress in broadband VoIP offerings such as Vonage and Skype, wireless operators are at a serious disadvantage in the home.

Hence the wireless operators are looking to enhance their macro-cell coverage with the help of micro-cell coverages(indoor) by deploying small base stations such as Femtocells or with the help of Relay technology. These miniature base stations are the size of a DSL router or cable modem and provide indoor wireless coverage to mobile phones using existing broadband Internet connections.

Pointing out some key advantages of Femtocells and Relays we will then focus on their adoption in advanced wireless networks(WiMAX and LTE)

fnr-femtocells1

 

 

 

 

 

FEMTOCELLS

Technical Advantages:

Low Cost: The Business Model would be initially by offering Femtos as a consumer purchase through mobile operators

Low Power: around 8mW- 120 mW lower than Wi-Fi APs.

Easy to Use: Plug-and-Play easily installed by consumers themselves

Compatibility & Interoperability: Compatibility with UMTS,EVDO standards and WiMAX,UMB & LTE standards

Deployment: In Wireless Operator owned licensed spectrum unlike WiFi

Broadband connected: Femtocells utilize Internet protocol (IP) and flat base station architectures, and will connect to mobile operator networks via a wired broadband Internet service such as DSL, cable, or fibre optics.

Customer’s point of view:

Increased Indoor Coverage: Coverage radius is 40m – 600m in most homes providing full signal throughout the household

Load sharing: Unlike in macro cells which supports hundreds of users, Femtos will support 5-7 users simultaneously  enabling lesser contention in accessing medium delivering higher data rates/user.

Better Voice Quality: As the users will be in the coverage envelope and closer to Femtos, they will definitely be supported with a better voice and sound quality with fewer dropped calls

Better Data/Multimedia Experience: It will deliver better and higher data performance with streaming musics, downloads and web browsing with lesser interruptions and loss of connections compared to a macro-cell  environment.

Wireless Operator’s point of view:

Lower CAPEX: Increased usage of femtocells will cut down huge capital costs on macro cell equipments & deployments. This includes costs savings in site acquisitions, site equipments, site connections with the switching centers.

Increased network capacity: Increased usage of femtocells will reduce stress on macro cells increasing overall capacity of mobile operators

Lower OPEX: With lesser macro cell sites it reduces the overall site maintenance, equipment maintenance and backhaul costs.

Newer Revenue Opportunities: With provision of excellent indoor coverage and superior user experience with voice and multimedia data services operators has an opportunity of raising its ARPU with more additions to family plans

Reduced Churn: Due to improved coverage, user multimedia experience and fewer dropped calls, will lead to a significant reduction in customer churn

Technical hurdles:

Spectrum: Femtocells works on licensed spectrum and as the spectrum is the most expensive resource it will be a major technical hurdle for the wireless operator for frequency planning.

RF Coverage Optimization: Radio tuning and optimization for RF coverage in macro cells is manually done by technicians which is now not possible at each femtocell level, henceforth self optimization and tuning over time according to the indoor coverage map has to be done either automatically or remotely which is a technical challenge.

RF Interference: Femtocells might be prone to femto-macro interference and also femto-femto interference in highly dense macro or micro environments which might affect the user experience.

Automatic System Selection: When an authorized user of a femto cell moves in or out of the coverage of the femto cell – and is not on an active call – the handset must correctly select the system to operate on. In particular, when a user moves from the macro cell into femto cell coverage, the handset must automatically select the femto cell, and visa versa.

Handoffs: When an authorized user of a femto cell moves in or out of coverage of the femto cell – and is on an active call – the handset must correctly hand off between the macro cell and femto cell networks. Such handoffs are especially critical when a user loses the coverage of a network that is currently serving it, as in the case of a user leaving the house where a femto cell is located.

Security & Scalability: A femto cell must identify and authenticate itself to the operator’s network as being valid. With millions of femto cells deployed in a network, operators will require large scale security gateways at the edge of their core networks to handle millions of femto cell-originated IPsec tunnels.

Femto Management: Activation on purchase and plug and play by end user is an important step and with a proper access control management allowing end-user to add/delete active device connections in the household. In addition, operators must have management systems that give first-level support technicians full visibility into the operation of the femto cell and its surrounding RF environment.

RELAYS:

Relay transmission can be seen as a kind of collaborative communications, in which a relay station (RS) helps to forward user information from neighboring user equipment (UE)/mobile station (MS) to a local eNode-B (eNB)/base station (BS). In doing this, an RS can effectively extend the signal and service coverage of an eNB and enhance the overall throughput performance of a wireless communication system. The performance of relay transmissions is greatly affected by the collaborative strategy, which includes the selection of relay types and relay partners (i.e., to decide when, how, and with whom to collaborate).

Relays that receive and retransmit the signals between base stations and mobiles can be used to effectively  increase throughput extend coverage of cellular networks. Infrastucture relays do not need wired connection to network thereby offering savings in operators’ backhaul costs. Mobile relays can be used to build local area networks between mobile users under the umbrella of the wide area cellular networks



Advantages:

Increased Coverage: With multi-hop relays the macro cell coverage can be expanded to the places where the base station cannot reach.

Increased Capacity: It creates hotspot solutions with reduced interference to increase the overall capacity of the system.

Lower CAPEX & OPEX: Relays extending the coverage eliminates the need of additional base stations and corresponding backhaul lines saving wireless operators deployment costs and corresponding maintenance costs. The relays can be user owned relays provided by operators and can be mounted on roof tops or indoors.

Better Broadband Experience: Higher data rates are therefore now available as users are close to the mini RF access point.

Reduced Transmission power: With Relays deployed there is a considerable reduction in transmission power reducing co-channel interference and increased capacity.

Faster Network rollout: The deployment of relays is simple and quickens the network rollout process with a higher level of outdoor to indoor service and leading to use of macrodiversity increasing coverage quality with lesser fading and stronger signal levels.

As a hot research topic with great application potential, relay technologies have been actively studied and considered in the standardization process of next-generation mobile communication systems, such as 3GPP LTE-Advancedand IEEE 802.16j (multihop relays for WiMAX standards).
Relay Types




Two types of RSs have been defined in 3GPP LTE-Advanced and 802.16j standards, Type-I and Type-II in  3GPP LTE-Advanced, and non-transparency and transparency in IEEE 802.16j.



Specifically, a Type-I (or non-transparency) RS can help a remote UE unit, which is located far away from an eNB (or a BS), to access the eNB. So a Type-I RS needs to transmit the common reference signal and the control information for the eNB, and its main objective is to extend signal and service coverage.Type-I RSs mainly perform IP packet forwarding in the network layer (layer 3) and can make some contributions to the overall system capacity by enabling communication services and data transmissions for remote UE units.



On the other hand, a Type-II (or transparency) RS can help a local UE unit, which is located within the coverage of an eNB (or a BS) and has a direct communication link with the eNB, to improve its service quality and link capacity. So a Type-II RS does not transmit the common reference signal or the control information, and its main objective is to increase the overall system capacity by achieving multipath diversity and transmission gains for local UE units.

Pairing Schemes for Relay Selection

One of the key challenges is to select and pair nearby RSs and UE units to achieve the relay/cooperative gain. The selection of relay partners (i.e., with whom to collaborate) is a key element for the success of the overall collaborative strategy. Practically, it is very important to develop effective pairing schemes to select appropriate RSs and UE units to collaborate in relay transmissions, thus improving throughput and coverage performance for future relay-enabled mobile communication networks.

This pairing procedure can be executed in either a centralized or distributed manner. In a centralized pairing scheme, an eNB will serve as a control node to collect the required channel and location information from all the RSs and UE units in its vicinity, and then make pairing decisions for all of them. On the contrary, in a distributed pairing scheme, each RS selects an appropriate UE unit in its neighborhood by using local channel information and a contention-based medium access control (MAC) mechanism. Generally speaking, centralized schemes require more signaling overhead, but can achieve better performance

Relay Transmission Schemes

 

Many relay transmission schemes have been proposed to establish two-hop communication between an eNB and a UE unit through an RS

Amplify and Forward — An RS receives the signal from the eNB (or UE) at the first phase. It amplifies this received signal and forwards it to the UE (or eNB) at the second phase. This Amplify and Forward (AF) scheme is very simple and has very short delay, but it also amplifies noise.

Selective Decode and Forward — An RS decodes (channel decoding) the received signal from the eNB (UE) at the first phase. If the decoded data is correct using cyclic redundancy check (CRC), the RS will perform channel coding and forward the new signal to the UE (eNB) at the second phase. This DCF scheme can effectively avoid error propagation through the RS, but the processing delay is quite long.

Demodulation and Forward — An RS demodulates the received signal from the eNB (UE) and makes a hard decision at the first phase (without decoding the received signal). It modulates and forwards the new signal to the UE (eNB) at the second phase. This Demodulation and Forward (DMF) scheme has the advantages of simple operation and low processing delay, but it cannot avoid error propagation due to the hard decisions made at the symbol level in phase one.

Comparison between 3GPP LTE Advanced and IEEE 802.16j RSs

Below shows comparison between Type I(3GPP- LTE Advanced) and Non-Transparency(IEEE -802.16j) RSs



Technical Issues

Practical issues of cooperative schemes like signaling between relays and different propagation delays due to different locations of relays are  often overlooked.  If  the difference in time of arrival between the direct path from source to destination and the paths source-relay-destination is constrained then relays must locate inside the ellipsoid as depicted below. Thus,  in practice, such a cooperative system shoiuld be a narrow band one, or guard interval between transmitted symbols should be used to avoid intersymbol interference due to relays.

In band relays consume radio resources and Out of band relays need multiple transceivers.
Continue reading
117 Hits
1 Comment